Download the LBA-2 User Interface Software
Name:

Company:

Email:

LBA-2 USER INTERFACE

LBA-2 FOR THYRO-P

The LBA-2 touch display is an optional accessory for the parametrization and visualization of measured values, e.g. current, voltage, power, setpoint.

KEY FEATURES

In addition to simplifying the handling of Thyro-P, the LBA-2 also offers a quick overview of Thyro-P‘s status. Ongoing data can also be displayed as line or bar charts. The EasyStart feature simplifies the setting of the Thyro-P configuration.

An additional feature is the integrated data recorder that enables a long-term recording of up to 6 measured values including status messages. The data evaluation is supported on PC.

LBA-2 is available in the following versions:
  • Touch display with SD memory card
  • Touch display with SD memory card and Bluetooth feature
The new local operating and display unit LBA-2 is compatible with all devices from the Thyro-P series, as well as with the cabinet installation kit (SEK) and can be used in place of the former LBA model.



LBA-2 BLUETOOTH ADAPTER

Wireless Adaptor FOR ANDROID & THYRO-TOOL FAMILY

The Bluetooth adapter allows an easy commissioning of Thyro-P devices via wireless data communication. The Bluetooth adapter can either be attached on Thyro-P such as a LBA-2 or be used together with SEK (cabinet installation kit). The wireless communication works together with the following devices:

» Smartphone with Android operating system
» Tablet PC with Android operating system
» Laptop with Thyro-Tool Family (from version 4.0)

For devices with android operating system, Thyro-App as free of charge software is available. (For further information, please contact your AE sales team)

KEY FEATURES

  • Easy commissioning for Thyro-P power controller
  • Operation of multiple wireless adapters at the same time
  • Communication via Tablet PC, Smartphone or PC
  • Display of active communication via status LED
  • Send parameter data directly from Thyro-App per mail to AE Support (e.g. for optimization/control of application parameters)
  • Parameterization and setting of devices
  • Display of all relevant data (set points, voltages, currents, loads, operation and error messages)
  • Display of measurement data as well as line diagrams (current, voltage, load, total set point)
  • Set point setting, e.g. for commissioning


CABINET MOUNTING KIT

LBA The mounting kit (SEK) is an optional accessory for the mounting of user interfaces LBA-2 or LBA into a cabinet.

Close

Stay connected!

Hear about our upcoming webinars!


Legal Notice  |  Privacy Policy