24V DC RELAY WITH TERMINAL

24V DC RELAY WITH TERMINAL The 24VDC relay with interface terminal is an optional accessory for the Thyro-Step Controller (TSC).

Nominal input voltage: 24 VDC
Nominal input current: 7 mA
-------------------------------------- Switching voltages:
Max.: 250 VAC
Min.: 12 VAC/DC
Max. current: 6A

Specifications

Coil Side
Nominal input voltage UN 24 V DC
Nominal input current at UIN 9 mA
Typical response time 5 ms
Typical release time 8 ms
Operating voltage display Yes
Protective circuit Protection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode

DC ELIMINATOR CARD

DC ELIMINATOR CARD The DC Eliminator Card (GSE) is an optional accessory for reducing DC current.

Support of types:
Thyro-1P...H in VAR (phase angle mode)


DIN RAIL ADAPTER (16A / 30A)

DIN RAIL ADAPTER (16/30A) The adapter is an optional accessory for the rail mounting of power controller series Thyro-S and Thyro-A (16A / 30A).

Support of types:
All Thyro-1S devices
All Thyro-1A devices

Note: The adapter is included in delivery of Thyro-A 2A units.


DIN RAIL ADAPTER (45A / 60A)

DIN RAIL ADAPTER (16/30A) The adapter is an optional accessory for the rail mounting of power controller series Thyro-S and Thyro-A (45A / 60A).

Support of types:
All Thyro-1S devices
All Thyro-1A devices


THYRO-STEP CONTROLLER

THYRO STEP CONTROLLER The Thyro-Step Controller combines the features of a load sequencing control (10+1 circuits) with the traditional tasks e.g. of a monitoring system for mains load peaks, a data logging and control system. In addition, it serves as an I/O module. Owing to a wide range of applications, the Thyro-Step Controller fulfills the requirements of modern technology and of future applications, the main challenges of which include the reduction of system installa- tion costs.

Close

Stay connected!

Hear about our upcoming webinars!


Legal Notice  |  Privacy Policy