For a sales quote, meeting request, evaluation unit, or other sales question, please fill in the form below:


Terms of Use | Privacy Policy
PM Series
Photo of XS Series Power Supply
   

Single-Output Micro-Sized HV Modules

The PM series of proportional micro-sized high voltage power supplies are low-cost nominal performance DC-to-DC high voltage devices for applications that require a bias voltage ranging from 0 to 1 kV to 4 kV at 0 to 3 W.  With 2 kV of isolation or low ripple, these modules are ideal for use in size-critical reduced-cost applications.

Model-Specific Downloads

PM series brochure
PM series brochure   KOREAN
PM series brochure   JAPANESE
PM series brochure   SIMPLIFIED CHINESE

Typical Applications Features
  • Small, lightweight, portable devices
  • Ion trap mass spectrometry
  • Residual gas analyzers (RGA)
  • Electrophoresis
  • Ink jet printing
  • HI-pot/leakage testers
  • Pulse generators
  • Laser electro-optic modulation
  • Detectors
  • Gelger-Muller tubes (GM)
  • Avalanche photo diodes (APD)
  • Photo multiplier tubes (PMT)
  • Channel electron multipliers (CEM)
  • Silicon detectors (SID)
  • Ionization chamber detectors
  • Ultrasonic transducers
  • Small PZT drivers
  • ATE leakage testing
  • Bias supplies
  • 5 models from 0 to 1 kV DC to 4 kV DC
  • Proportional – HV output tracks the input to within 10%
  • Output power of 0 to 3 W; no minimum load
  • Output ripple of ≤0.5% V peak to peak , <0.25% with "-F option
  • Output regulation <5% (half load to full load)
  • 2,000 V isolation from input to output
  • No heat sink or electrical derating required
  • CE Mark (LVD & RoHS)
Specifications
Input Conditions All Models
Voltage Range Full power 5 to 12 VDC
Current No load, max EOUT Typically 40 to 60 mA
Current Max load, max EOUT nominal 200 mA
Output   1000 VDC 1500 VDC 2000 VDC 3000 VDC 4000 VDC
Voltage (VDC) Nominal input 400 to 1000 600 to 1500 800 to 2000 1200 to 3000 1600 to 4000
Power (W) Nominal input, max EOUT 3 3 3 3 3
Current (mA) IOUT entire output voltage range 3 2 1.5 1 0.75
Output
Voltage adjust Proportional Input Voltage of 40 to 100% programs the output voltage 40 to 100% ±10% full scale
Ripple Full load, max EOUT  0.5% peak to peak
Line regulation Nominal input, max EOUT, full power Output is proportional to input over a 40 to 100% input range with a variation of +10% of rated output voltage
Static load regulation No load to full load, max EOUT Typically 5% 1/2 load to full load, < 10% (for a 0 to 3 W load change) max 20%
Stability 30 min warm up, 8 hr/ per day <0.10%

Environmental
 Temperature coefficient Over the specific temperature  250 ppm/°C
 Operating temperature Full load, max EOUT, case temp -20 to +85°C
Humidity Non-condensing 0 to 90% non-condensing
Storage temperature Non-operating, case temp  -40 to +85°C
Shock Mil-std-810, method 516.5, proc. IV 40 G
Vibration Mil-std-810, method 514.5, fig.514.5C-3 20

 

Accuracy of specifications in unlocked documents cannot be guaranteed. Please contact your AE representative to confirm specifications.