For a sales quote, meeting request, evaluation unit, or other sales question, please fill in the form below:


Terms of Use | Privacy Policy
MV3000 Series
MV3000

High performance AC-to-MVDC single-output rack-mount medium-voltage power supplies

The MV3000 series high performance, medium output voltage power supplies feature a wide output range for OEM and industrial applications. The MV3000 meets the exacting requirements found in electron beam, ion beam, chemical purification systems, magnet drivers, and other 24/7 production processes.

The MV3000 series offers output voltages ranging from 100 to 300 V with a maximum output power of 3 kW in a compact 2 U 19" rack-mountable chassis. Parallel/series operation of units can easily be configured to provide higher output power levels to suit specific customer applications and/or provide n+1 redundancy.

The MV3000 series incorporates a power factor corrector, enabling the units to operate across a wide range of mains input voltages. Control and monitoring is available both locally via the front panel and remotely via the rear panel user interface.

Custom interface designs can be provided, making the MV3000 a flexible solution for all your industrial power supply needs. These include isolation (up to 1000 VDC) and RS232.

Model-Specific Downloads 

MV3000 series brochure
MV3000 series brochure KOREAN
MV3000 series brochure SIMPLIFIED CHINESE

Typical Applications Features
  • Electron beam
  • Ion beam
  • X-ray
  • Laser diodes
  • HV pulse generator bias
  • HV amplifier bias
  • Magnet bias
  • Chemical purification
  • Test and measurement
  • Automated test
  • Heating
  • Semiconductor processing
  • 3 kW output power
  • Output voltages: 100, 150, 200, 250, and 300 V
  • Parallel/series operation
  • High stability
  • Exceptional reliability
  • Full local and remote control monitoring
  • Voltage or current control
  • High packing density: 3 kW in 2 U
  • Stackable, cooling is front to rear
  • Active power factor correction
  • CE marked for EU LV Directive 2006/95/EC
  • Custom options available

SPECIFICATIONS

Output Power

3000 W at max output voltage and current

Output Voltage

100 to 300 V

Output Current

10 to 30 A depending on output voltage

Input Voltage

185 to 255 VAC 47 to 63 Hz single phase plus protective earth, operation below 185 VAC is possible with power derating down to 1500 W at 85 VAC

Input Current

Not exceeding 19 ARMS, harmonics are controlled with active power factor correction

Polarity

All models provide positive polarity. The output can be isolated from the chassis to provide negative outputs if required.

Control signals are referenced to the negative output.

Output Ripple

Voltage mode: < 0.1% peak to peak of rated output voltage +50 mV peak to peak

Current Mode

< 0.2% peak to peak of rated output current +50 mA peak to peak

Line Regulation

< 0.05% deviation in output voltage set point for a 10% change in supply line voltage

Load Regulation

Current mode: < 0.1% deviation in output current set point for a 0 to 100% change in output voltage

Voltage mode: < 0.1% deviation in output voltage set point for a 0 to 100% change in load current

Transient Response

Response for a 10% to 90% or 90% to 10% step change in load. Overshoot/undershoot < 2% of rated output. Recovery to within 0.1% of rated output < 10 ms.

Temperature Coefficient

100 ppm/°C

Drift

< 0.5% per 8 h after 1 h warmup

Protection

Over temperature

Output overvoltage (tracking demand available)

Output overcurrent (tracking demand available)

Fan failure

Input undervoltage

Operating Temperature

0 to +40°C (32°F to 140°F) ambient and air intake

Storage Temperature

-20 to +85°C (-4°F to 185°F)

Humidity

80% max relative humidity up to 31ºC, decreasing linearly to 50% at 40°C

Altitude

Sea level to 2000 m (6500')

Usage

Indoor use only

Installation Category

II (BSEN 61010)

Pollution Degree

2 (BSEN 61010)

Metering

Provided as part of an alphanumeric display.

Voltage meter reads 0 V to full output; resolution is < 0.5% of rated output.

Current meter reads 0 A to full output; resolution is < 1.5% of rated output.

Set point voltage (current) is displayed when the voltage (current) control knob is depressed.

Status Indication

If a trip occurs, the V and A information will be overwritten by the cause of the trip which may be one

of:- ‘OVER VOLTAGE’, ‘OVER TEMPERATURE’, ‘OVER CURRENT, ’USER I/L OPEN’, or ‘LOOP CONTROL’. In addition the trip LED will illuminate.

Cooling

Fan assisted with fan fail detection. Air inlets at the front of the unit, exhaust on the rear. Min air flow inlet rate is 3 ms-1.

For shelf mounting a 25 mm gap must be provided at the front and rear of the unit for air exhaust. No gap above or below the unit is necessary.

Mechanical Specifications

Dimensions (W x H x D)

19" rack mounting: 483 mm (19") x 88 mm (3.46") x 494 mm (19.4")

Weight

15 kg (33 lb)

Connections

All connections are mounted on the rear panel and controlled via 25-way female D-type, DC output via Anderson Power Products 992-SB®50 Gray.

Mains

IEC320-C20 16A connector

Safety Earth

M6 stud

Models

MODEL NO

OUTPUT VOLTAGE

OUTPUT CURRENT

MV3000-101

100 V

30 A

MV3000-151

150 V

20 A

MV3000-201

200 V

15 A

MV3000-251

250 V

12 A

MV3000-301

300 V

10 A

If none of the models listed above suit your requirements, please contact our Sales Team to discuss a custom version (please see back page for contact details).

CONNECTIONS

Pin

Function

1

V STATUS INDICATOR

2

I STATUS INDICATOR

3

V MONITOR

4

FAULT INDICATOR

5

LOCAL INDICATOR

6

OUTPUT ON INDICATOR

7

V DEMAND MONITOR

8

OUTPUT ON/OFF (LO)

9

OUTPUT ON/OFF (HI)

10

V DEMAND (HI)

11

V DEMAND (LO)

12

0 V

13

MONITOR 0 V

14

I MONITOR

15

OUTPUT OFF INDICATOR

16

REMOTE INDICATOR

17

NO CONNECTION

18

+10 V REFERENCE

19

NO CONNECTION

20

NO CONNECTION

21

OUTPUT ENABLE (LO)

22

OUTPUT ENABLE (HI)

23

I DEMAND (LO)

24

I DEMAND (HI)

25

I DEMAND MONITOR

All functions are provided on a 25-way female D-type connector mounted on the rear of the unit.
 

Accuracy of specifications in unlocked documents cannot be guaranteed. Please contact your AE representative to confirm specifications.