For a sales quote, meeting request, evaluation unit, or other sales question, please fill in the form below:


Terms of Use | Privacy Policy
D Series
Photo of XS Series Power Supply

Low-Profile Micro-Sized High Voltage Power Supply

The D series of high voltage power supplies is designed to meet the needs of customers with low-profile applications. These ultra-compact modules are adapted to controlling photo detectors that require high-bias voltages and currents. D series PCB-mount high-voltage power supplies feature a light-weight design, state-of-the-art surface-mount technology, and five-sided metal enclosures.

Model-Specific Downloads

D series brochure
D series brochure     JAPANESE

D series brochure     KOREAN
D series brochure     SIMPLIFIED CHINESE
D series data pack
Interfacing with the UltraVolt D Series of Microsize High Voltage Power Supplies

 

Typical Applications Features
  • Scanning electron microscopes (SEM)
  • Mass spectrometry
  • Gas chromatography
  • Spectrometers
  • Electrostatic chuck (e-chuck)
  • PZT drivers
  • Pulse generators
  • Laser electro-optic modulation
  • Fiber-optic telecom detectors
  • Particle physics detectors
  • Laser range finder detectors
  • Geiger-Muller tubes (GM)
  • Avalanche photo diodes (APD)
  • Photo multiplier tubes (PMT)
  • Photodiodes (PD)
  • Thin-film bias
  • High voltage testing
  • 4 models from 0 to 1 kV through 0 to 6 kV
  • 1, 2, 4, or 6 W output power
  • Low ripple (< 0.02% peak to peak)
  • Tight line/load regulation
  • Output current limit protection
  • Adjustable from 0 to full output
  • Buffered voltage and current monitoring
  • 15 or 24 VDC input
  • Low profile and lightweight
  • PCB flat mounting
Specifications
Input voltage VIN (pins 1 & 2) 15 VDC ±1.5 V
24 VDC ±2 V
Input current Example for a 15 VDC, output 6000 V, 1 mA model:
inhibition mode: 27 mA
at no load & HV = 6000 V 46 mA, at full load < 630 mA 
Polarity  Fixed positive or negative
Output voltage 0 to 1000
VDC
0 to 2000
VDC
0 to 4000
VDC
0 to 6000
VDC
Output power (W) 1 2 4 6 1 2 4 6 1 2 4 6 1 2 4 6
Output current (mA) 1 2 4 6 0.5 1 2 3 0.25 0.5 1 1.5 0.17 0.33 0.67 1
Programming (pins 4 & 6) Via external voltage source 0 to +5 V ±0.1% at full scale, and input impedance = 94 kΩ
Max output current lout Limited to 110% of nominal current
Load voltage regulation  ±0.01% of full output voltage for no load to full load
Line voltage regulation  ±0.01% of full output voltage over specified input voltage range
Residual ripple  <0.02% peak to peak at full load
Output HV monitoring (pin 7)
(still operating in inhibition mode)
Analog 0 to +5 V buffered output signal, accuracy ±0.2%
Output impedance = 1 kΩ
Temperature coefficient: 50 ppm/°C for≤ 4 kV units, 100 ppm/°C for 6 kV units
Output voltage monitoring (pin 5) (still operating in inhibition mode) Analog 0 to +5 V buffered output signal, accuracy ±2%
Output impedance = 1 kΩ
Temperature coefficient: 100 ppm/°C
HV ON/OFF (pin 1) To disable (opened remote interlock) or enable (closed remote interlock)

Interlocks and Limits
Reverse VIN Limited against reverse VIN
Soft start feature Start is guaranteed with no overshoot
Auto inhibition If Tcase > 75°C
HV setting Internally limited to 5.3 V

Cooling
 Temperature coefficient  100 ppm/°C
 Operating temperature  -10 to +65°C, full load, max Eout, case temp
Storage temperature  -10 to +70°C

 

Accuracy of specifications in unlocked documents cannot be guaranteed. Please contact your AE representative to confirm specifications.