For a sales quote, meeting request, evaluation unit, or other sales question, please fill in the form below:


Terms of Use | Privacy Policy
HITEK POWER® CC1000
Photo of XS Series Power Supply

Capacitor-Charging Power Supplies

The Series CC1000 is a range of high performance, high reliability capacitor charging power supplies intended for use as a component power supply in medical and industrial environments. It features high frequency switching techniques to combine a power factor corrected and resonant converter in a compact unit. This range has been designed to allow customization to suit specific OEM applications.

Model-Specific Downloads

CC1000 series brochure
Download CAD .sat file
Download CAD .stp file
 
Features Typical Applications
  • 1kW output power
  • High efficiency zero current and voltage switching techniques
  • Positive and negative voltage versions available
  • Excellent pulse to pulse repeatability characteristics
  • Compact size
  • Low weight
  • RoHS compliant to directive 2011/65/EU
  • CE marked
  • Industrial laser systems
  • Non-contact medical environments
  • Capacitor charging circuits
  • Nd:YAG & Er:YAG lasers
  • Intense pulsed light systems
Specifications
Output power 1kW output power
Output voltage 0 to 2kV max depending on model
Output current 4000mA max depending on model
Input voltage 90-255V AC depending on model
Input current 15A max
Polarity Positive or negative to order
Power factor correction Power factor corrected to meet the requirements of the EC EMC directive for line harmonics (BS EN61000-3-2).
Charging rate 1000 Joules per second average (equivalent to 1kW average).  Peak power during the charging cycle may be up to double this.  Peak charging rate up to 1100 J/s
Stored energy Less than 0.3 Joules
Stability ±0.2% per hour, after 1 hour warm-up
Pulse to Pulse Repeatability ±0.2% to 300Hz.
Please contact our sales team for ratings outside this range
Line regulation ±0.2% of rated output
Temperature coefficient 100ppm/oC over operating temperature range
Operating temperature 0 to +45°C
Storage temperature -40oC to -85oC
Humidity 90% maximum relative humidity non-condensing
Altitude Sea level to 2000m (6500 ft)
Installation category 1 (BS EN61010-1)
Pollution degree 2 (BS EN61010-1)
Control The power supply is operated via the 15-way D-type connector situated on the rear panel.  Full control and monitoring functions are available by this method
Cooling Forced air cooling by an integrated fan.  Air insulated HV section
Protection The units are fully protected against flashover and continuous short circuit (no trip)
EMC The Series CC1000 is intended for installation as a component of a system.  Basic EMC filtering is provided
Safety The Series CC1000 meets the requirements of the Low Voltage Directive (LVD), 2006/95/EC by complying with BS EN61010 when it is installed as a component part of compliant equipment.  It is CE marked accordingly.
RoHS The Series CC1000 meets the requirements of EU Directive 2002/95/EC on the Restriction of use of Certain Hazardous Substances in electrical and electronic equipment (RoHS).




Accuracy of specifications in unlocked documents cannot be guaranteed. Please contact your AE representative to confirm specifications.