CP Series
Photo of XS Series Power Supply

Constant Power High Voltage Power Supply

The CP series of high voltage regulated DC-to-DC converters is optimized for tri-mode operation in bias applications, charging applications, and pulsed power applications—and provides excellent line and load regulation, dynamic response, and stability. The CP ceries operates in constant voltage, constant current, or constant power modes and features buffered current, voltage, and power monitors.
Typical Applications Features
  • Strike-and-run
  • Plasma
  • Electrophoresis
  • 6 models available from 0 to 1 kV through 0 to 15 kV
  • 10 W max output power level
  • 0 to +10 V remote programming for all modes
  • +10 V compensated reference
  • Tight line and load regulation
  • Operates in constant voltage, constant current, or constant power modes
Input Conditions 24 V
Voltage Range (VDC) Full power +24 VDC  ±10%
Current (mA) Standby/disable <70 mA
Current (mA) Full load, max EOUT <925 mA
Current (mA) No load, max EOUT <375 mA
AC ripple current (mA p-p) Nominal input, full load <30 mA peak to peak
Output   1 CP 2 CP 4 CP 6 CP 10 CP 15 CP
Voltage range (VDC)   0 to 1000 0 to 2000 0 to 4000 0 to 6000 0 to 10,000 0 to 15,000
Power (W) Nominal input, max EOUT 10
Current (mA) IOUT max 100 50 25 16.7 10 6.7
Ripple (V p-p) Full load, max VOUT TBD TBD TBD TBD 50 55
Ripple  (V p-p) Full load, max IOUT TBD TBD TBD TBD 60 55
Line regulation (VDC) VIN min to VIN max, max EOUT <0.01% VDC
Load regulation (VDC) No load to full load, max EOUT <0.01% VDC
Programming & Controls All Types
Input impedance (MΩ) Normal operating conditions, all inputs 10 MΩ
Output voltage (VDC) T=+25°C, initial value 10.5 VDC ± 0.2%
Output impedance T=+25°C Buffered, low impedance, 3 mA max
Stability Over full temperature 5 PPM/°C
Enable/disable 0 to +2 disable, +3 to 10 enable (default = enable)

 Temperature coefficient Over the specific temperature  ±100 ppm/°C
 Operating temperature Full load, max EOUT, case temp -40 to +65°C
Humidity All conditions, standard package 0 to 95% non-condensing
Storage temperature Non-operating, case temp -55 to +105°C
Shock Mil-std-810, method 516.5, proc. IV 20 G
Vibration Mil-std-810, method 514.5, fig.514.5C-3 10 G
Thermal shock Mil-std 810, method 503-4, proc. II -40 to +65°C
Altitude Standard package, all conditions Sea level through vacuum


Accuracy of specifications in unlocked documents cannot be guaranteed. Please contact your AE representative to confirm specifications.

Model-Specific Downloads

CP series data sheet         JAPANESE
CP data packet